Casperworld Forum

Moin zusammen,

ich habe mal eine bescheidene Frage an die Experten unter euch.
Ich habe mir vor einiger Zeit einen DVD brenner gekauft von LG.
Der bis 16 Fach brennt.
Nun will ich meine Platte mal ein wenig aufräumen und einige dinge auf DVD brennen.
Ich stelle 16 Fach ein und er beginnt auch sehr flott mit brennen und wird während des Brennvorgangs immer langsamer.
Kein plan wo das problem liegt, aber vielleicht hat ja einer von euch eine Idee woran das liegt.
Am ende hat das brenner einer vollen DVD 20 min gedauert, also 4 fach ..

Hoffe das vielleicht jemand eine IDee hat.

Billy

hab ich alles ausprobiert...
es ändert aber absolut nix..
hab DMA eingestellt klappt nicht
danach das teil deinstalliert.. geht immer noch nicht
Firmware aktuallisiert .. nix gebracht
rohlinge gewechselt. nix gebracht..
absolut kein plan woran das sonst liegen kann.

HELP!

@ Haley: Jumperung is auf Cable Select glaube.
CPU Auslastung ist immer zwischen 5 % - 20 %
brenne gerade eine DVD .. 4 GB = gesamtzeit knapp 30 minuten.
Fehlermeldungen kommen keine.
Er zeit halt erst an: brennen mit 16 fach. Gesamtzeit irgendwas bei 4min 30, wenn die rum sind, spingt die zeit auf 20 min. dann auf 30...
Ich bin absolut ratlos.
Hab heute sogar mein SYSTEM neu gemacht.
Wie sollte ich den Brenner denn am besten Jumpern ?

Hier mal der komplette Log nach dem Brennen:

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.05 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR STM3320820A atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1614N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N G: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 1112MB (1139072kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.10.2008
ISO Zusammenstellung
23:22:42 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

23:22:42 #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

23:22:42 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

23:22:42 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

23:22:43 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2106591 (468:07.66, 4114MB)

23:22:43 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

23:22:43 #7 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

23:22:43 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:22:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2106592 (2106592) = #2106592/468:7.67
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2106592 blocks [G: HL-DT-ST DVD-RAM GSA-H55N]
--------------------------------------------------------------

23:22:45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4314300416, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2106592 | 0 | 0x00
2106592 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

23:22:45 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

23:22:45 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

23:22:45 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

23:22:45 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

23:22:45 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

23:22:45 #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22.160 KB/s)

23:22:45 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:22:45 #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

23:22:45 #19 Text 0 File DVDR.cpp, Line 6553
Drive: HL-DT-ST DVD-RAM GSA-H55N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

23:22:45 #20 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM

23:22:45 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0623b300: Len x648

23:22:45 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

23:22:45 #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

23:48:59 #24 Text 0 File WriterStatus.cpp, Line 113
<G: HL-DT-ST DVD-RAM GSA-H55N> start writing Lead-Out at LBA 2106592 (2024E0h), length 0 blocks

23:49:46 #25 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2106592

23:49:46 #26 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 16x (22.160 KB/s)

23:49:47 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:49:56 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

23:49:56 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

hmm einstein das problem liegt nicht da...
ich habe beim brennen / abspielen der dvds ne auslastung von 10 % ...
und das DMA is soweit nur dann das problem wenn ich 100 % auslastung habe beim brennen oder nicht ?

habe beim brenner derzeit Ultra-DMA Modus 4
also is da alles ok.

CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On <--- Logfile vom brennprogramm zeigt ja auch an das DMA aktiv ist

danke trotzdem für den Link.. war sehr ausführlich beschrieben!

und irgendwann machts wusch und 1 TB daten sind weg